El Tigre de Bonsai
Sapling
Went down to the local mill to get some 2x4's cut. I live in a small town and there is no industrial grade lumber available nearby. I used 180cm long 1x4's for the top of these tables, and 2x4's for the bottom of the table. I put 5 or 3 2x4's horizontally under the tables based on the width, then i put two 2x4's underneath the table vertically for support. The goal was to be able to sit a wide structure ontop of red bricks, which are more narrow than cinder blocks. One my plants pot is 50cm wide, so i needed a wide table for a few of my bigger trees. Here is the result. I put a coat of varnish on each side of these, and two coats on the top of the table, before placing plants on the table. The smaller benches are training benches.











